公司新闻
摊铺机的日常检查与保养
来源:/ 日期:2023-05-26
摊铺机是一种主要用于公路基层和面层各种材料摊铺作业的施工设备,是由各种不同的系统相互配合完成摊铺工作的,主要包含行走系统、液压系统、输分料系统等。下面济南摊铺机出租厂家来讲讲摊铺机的日常检查与保养事项。
Paver is a kind of construction equipment mainly used for paving various materials of road base and surface course, which is completed by various systems, mainly including walking system, hydraulic system, material conveying and distribution system, etc. Now let's talk about the daily inspection and maintenance of the paver from the paver rental manufacturer in Jinan.
(1)每天开机前要检查三液(发动机油油位.防冻液液位以及液压油液位),如有缺少的及时补充正常指示刻度。
(1) Before starting the machine every day, check the three fluids (engine oil level, antifreeze level, and hydraulic oil level), and if there is any shortage, replenish it to the normal indicated scale in a timely manner.
(2)检查分动箱、螺旋齿轮箱齿轮油油位,如有缺少的及时补充正常指示刻度。
(2) Check the gear oil level of the transfer case and spiral gear case, and if there is any shortage, replenish it to the normal indicating scale in time.
(3)检查摊铺机各部件连接螺栓的紧固情况,特别是左右台车架和机架、熨平板、挡料板、螺旋吊臂、刮料板输送装置的螺栓是否松动或断裂,必要时予以紧固。
(3) Check the fastening of the connecting bolts of all parts of the paver, especially the bolts of the left and right carriages and frames, screeds, baffle plates, spiral booms, and scraper conveyor for looseness or breakage, and tighten them if necessary.
(4)检查加热系统的喷火头、连接管、气罐开关是否正常。
(4) Check whether the nozzle, connecting pipe, and gas tank switch of the heating system are normal.
(5)检查自动润滑装置的润滑脂是否够用(2#锂基脂)
(5) Check if the lubricating grease of the automatic lubrication device is sufficient (2 # lithium grease)
(6)检查各电器插头是否有松动脱落现象。
(6) Check whether the electrical plugs are loose or detached.
(7)检查螺旋反向叶片是否磨损严重,必要时及时更换。
(7) Check if the spiral reverse blades are severely worn and replace them in a timely manner if necessary.
(8)启动前检查操作面板各个开关是否在停止位,各转动部件之间有无干涉。
(8) Before starting, check whether the switches on the operation panel are in the stop position and whether there is any interference between the rotating components.
(9)每日工作结束后清洁摊铺机,摊铺机表面粘接和堆积的水稳料、沥青料等,机器表面和液压元件等部件表面上的尘土、油垢。
(9) Clean the paver at the end of daily work, remove the water stabilized material, asphalt, etc. adhered and accumulated on the surface of the paver, and remove the dust and oil dirt on the surface of the machine and hydraulic components and other parts.
In addition, pay attention to whether there is abnormal sound during the paving operation, whether the engine, mechanical transmission system and hydraulic system of the paver are overheated, and whether the paver slips and deviates during operation. For more related matters, come to our website Consulting!