行业资讯

压路机在路面压实过程中的六大技巧

来源：/ 日期：2023-06-12

路面压实施工是公路沥青路面施工过程中的重要工序之一，沥青路面的充分压实对于保证其结构强度，避免路面发生早期损坏，提高路面使用寿命具有重要意义，而传统的力求路面压实管理监测主要为事后管控，沥青路面压实质量难以控制，且施工完成后处理成本较高，因此在路面压实质量管理上就非常的困难。

Road compaction construction is one of the important procedures in the construction process of highway asphalt pavement. Adequate compaction of asphalt pavement is of great significance in ensuring its structural strength, avoiding early damage to the pavement, and improving the service life of the pavement. However, traditional road compaction management and monitoring mainly focus on post control, making it difficult to control the compaction quality of asphalt pavement, and the cost of treatment after construction is high, Therefore, it is very difficult to manage the quality of road compaction.

在路面施工的过程中，除了在施工过程中对质量进行监控之外，压路机在施工过程中的施工技巧也非常重要，它对于路面的施工质量也有一定的影响。下面济南压路机租赁人员来讲讲其中的技巧：

In the process of road construction, in addition to monitoring the quality during the construction process, the construction skills of road rollers are also very important, and it also has a certain impact on the construction quality of the road surface. Below, Jinan roller rental personnel will explain the techniques:

1、无论是上坡还是下坡，沥青混合料低下一层必须清洁干燥，而且一定要喷洒沥青结合层，以避免混合料在压实时滑移。

1. Whether on an uphill or downhill slope, the lower layer of asphalt mixture must be clean and dry, and the asphalt binder layer must be sprayed to avoid slipping during compaction.

2、无论是上坡压实还是下坡压实，压路机的驱动轮均应在后面。

2. Whether it is uphill compaction or downhill compaction, the driving wheels of the roller should be at the rear.

3、上坡压实时，压路机起步、停止和加速都有平稳，避免速度过高或过低。

3. When compacting uphill, the roller should start, stop, and accelerate smoothly to avoid excessively high or low speeds.

4、上坡压实前，应使混合料冷却到规定的低限温度，而后进行静力预压，待混合料温度降到下限时，才采用振动压实。

4. Before uphill compaction, the mixture should be cooled to the specified lower limit temperature, and then static preloading should be carried out. Vibration compaction should only be used when the temperature of the mixture drops to the lower limit.
济南压路机租赁

5、下坡压实时应避免突然加速和制动。

5. When compacting downhill, sudden acceleration and braking should be avoided.

6、在坡度很陡的情况下进行下坡压实时，应先使用轻型压路机进行预压，而后再使用重型压路机或振动压路机进行压实。

6. When performing downhill compaction on steep slopes, a light roller should be used for pre compaction first, and then a heavy roller or vibrating roller should be used for compaction.

压路机在路面压实过程中的六大技巧相关事项就讲解到这里了，希望能够给您好的帮助，更多事项就来我们网站咨询！

That's all for the six tips and related matters of road rollers in the process of road compaction. We hope to provide you with good help. For more information, please come to our website consulting service

上一条：使用水稳拌和站的日常注意事项

下一条：水稳摊铺施工过程需要注意的事项