行业资讯

装载机行驶过程中变速箱“跳”的应急方式

来源：/ 日期：2022-12-14

在装载机的行驶过程中，如果变速箱“跳”，济南装载机租赁厂家提醒您及时适时停止机器（或继续行驶），然后找出缘故并排除故障。实际方式是：

During the driving process of the loader, if the gearbox "jumps", the Jinan loader rental manufacturer reminds you to stop the machine (or continue driving) in a timely manner, then find out the cause and remove the fault. The actual method is:

（1）在平缓的道路上行驶时，如果时有发生“变速”，则可以按照一般而言的停止方式使机器停止，并精心调查缘故，排除故障。

(1) When driving on a gentle road, if "shifting" happens occasionally, the machine can be stopped according to the general stopping method, and the cause can be carefully investigated to eliminate the fault.

（2）在上坡行驶时时有发生“换档”时，可以将档位设立在低速档或档，备用单元抵达坡顶时将停止，以排除故障。“如果降档败北或再度时有发生”，则在“换档”时，根据斜坡的要点和要求停止，以扫除故障。

(2) When "shifting" occurs when driving uphill, the gear can be set at low speed or first gear, and the standby unit will stop when it reaches the top of the slope to eliminate the fault. "If the downshift fails or occurs again", stop according to the key points and requirements of the slope when "shifting" to remove the fault.

（3）在下坡行驶时时有发生“换档”时，应根据升档的动作要点将档位设立为高速档，或采取“抓档”措施（紧急降档），备用装置应再度驶斜坡底部停止以检验并排除故障；

(3) In case of "gear shifting" when driving downhill, the gear shall be set to the high gear according to the action point of upshift, or "gear holding" measures (emergency downshift) shall be taken, and the standby device shall be driven to the bottom of the slope again to stop for inspection and troubleshooting;
济南装载机租赁

如果“换档”或“抓动”不成功或再度时有发生“换档”（此时为空档），驾驶员可以将引擎转速操纵在中速（以防范引擎熄火），请用到“点制动”方式进行操作机器滑到斜坡的底部，然后进行故障排除。

If "shifting" or "grabbing" is unsuccessful or "shifting" occurs again (it is neutral at this time), the driver can control the engine speed at medium speed (to prevent the engine from stalling). Use the "spot braking" method to operate the machine to slide to the bottom of the slope, and then perform troubleshooting.

如果“变速”，“阻塞”未成功或再度时有发生“跳跃”（此时为空档），并且机器降低了一个大坡道（机器将以非常快的速度移斜坡的底部）”），您应当根据下坡停车动作和要求很快停车，然后排除故障。

If "shifting", "blocking" is not successful or "jumping" occurs again (it is neutral at this time), and the machine lowers a large ramp (the machine will move to the bottom of the slope at a very fast speed) ", you should stop quickly according to the downhill parking action and requirements, and then troubleshoot.

装载机行驶过程中变速箱“跳”的应急方式相关解答内容就到这里了，您平常使用中要及时进行检查清洁。更多注意事项就来我们网站咨询！

This is the end of the relevant answers to the emergency mode of the gearbox "jumping" when the loader is running. You should check and clean it in time during normal use. More notes on our website consulting service

上一条：路面机械设备出库后的修理保养

下一条：加纤维沥青混凝土的拌和要求