行业资讯
装载机走合磨合期要注意什么细节？
来源：/ 日期：2022-04-23
装载机的主要作用便是装卸搬运各种物品，作用大效果不错，所以在市场中越来越受欢迎，那么要想更好的使用机器工作就要多多去了解它，比如从问题开始了解，装载机走合磨合期要注意什么细节？
The main role of loader is loading and unloading and handling various items, the effect is good, so it is more and more popular in the market, so in order to better use the machine to work, we must learn more about it, such as starting from the problem, what details should be paid attention to during the loader run-in?
使用机器前，请仔细阅读装载机手册，并注意手册中的每一项注意事项；在运行和关闭过程中，每个档位的前进档和倒档应均匀布置；在磨合期内，装载重量不得超过额定载荷的70%；注意机器的润滑，在规定的时间更换或添加润滑油。
Before using the machine, please read the loader manual carefully and pay attention to each item in the manual. In the process of running and closing, the forward and reverse gears of each gear should be evenly arranged; During the run-in period, the loading weight shall not exceed 70% of the rated load; Pay attention to the lubrication of the machine, change or add lubricating oil at the specified time.
装载机须时刻注意变速箱、变矩器、前后桥、轮毂和制动鼓的温度。若有过热现象，应查明原因并排除；磨合期以装载松散物料为宜，不宜过于猛烈或过于仓促；检查电气系统各部件的温度及接线情况，发电机供电状态，照明等工作情况。
The loader must always pay attention to the temperature of the gearbox, torque converter, front and rear axle, hub and brake drum. If there is overheating, the cause should be identified and eliminated; Run-in period to load loose materials is appropriate, should not be too violent or too hasty; Check the temperature and wiring condition of electrical system components, power supply status of generator, lighting and other working conditions.
济南装载机租赁人员认为检查几个关键部件（发动机、轴箱、轮辋、传动轴等）螺栓螺母的紧固情况很是重要；磨合期满后，清洗变速箱油底壳滤清器，更换新油；并更换发动机油和驱动油。
Ji 'nan loader rental personnel think that a comprehensive inspection of several key components (engine, axle box, rim, drive shaft, etc.) bolt and nut fastening situation is very important; After running in, clean the filter of gearbox oil pan and replace the new oil; And change the engine oil and drive oil.
另外，装载机工作时，很多司机习惯于一边换档一边利用机器高速运转的惯性冲向料堆，利用行驶的惯性冲桩，会使整机受到严重冲击，各部位受力不均，对整机造成很大伤害，这会导致铲斗、动臂、前车架等变形、开裂；变速箱和离合器会因突然受力而扭曲变形，扭矩增大，摩擦片容易打滑；传动部件也容易损坏，因此使用时的方法方式正确。
In addition, when the loader is working, many drivers are used to change gears while using the inertia of the machine at high speed to rush to the pile. Using the inertia of the driving pile, the whole machine will be severely impacted, and the uneven force on all parts will cause great damage to the whole machine, which will lead to the deformation and cracking of the bucket, boom and front frame. Gearbox and clutch will be distorted by sudden force, torque increases, friction plate is easy to slip; Transmission parts are also easy to damage, so the method of use is correct.
What details should be paid attention to in the run-in period of the loader? The above is the related content of the problem, if you have questions about this or want to know more about the content of the machine equipment, please come to the website to consult and see!
公司地址：济南市商河县贾庄镇民营经济创业园
公司名称:2023澳门正版资料免费 
备案号：