行业资讯
济南水稳搅拌站发生过热现象的原因
来源：/ 日期：2022-04-14
水稳搅拌站其实和大多数机械设备一样，运行时间久了就会出现过热的现象，这也让很多用户担心这种现象的出现会不会给设备造成伤害。下面我们就先来分析分析原因吧。
In fact, water stability mixing station and most mechanical equipment, running for a long time will appear overheating phenomenon, which also makes many users worry that the emergence of this phenomenon will not cause damage to the equipment. Let's first analyze the reasons.
济南水稳搅拌站的热源产生过多的余热，产生多余余热的方法有3种：
The heat source of ji 'nan water stability mixing station produces too much waste heat, and there are three ways to produce excess waste heat:
一是柴油机燃烧工况不良，如喷油压力调整不当、气门相位不平衡、喷油正时不准确、燃油含水量过高、柴油机进气量过多等。二是液压传动等传动系统产生的摩擦热增加，如润滑不良，使摩擦增大；三是压力损失转化的热量过多。例如液压管路堵塞或曲率过大，会增加沿途的压力损失，阀组动作过于频繁，节流和溢流造成的能量损失过大。
One is the diesel engine combustion conditions, such as improper injection pressure adjustment, valve phase imbalance, injection timing is not accurate, fuel water content is too high, diesel engine intake too much. Second, the friction heat generated by hydraulic transmission and other transmission systems increases, such as poor lubrication, so that friction increases; Third, excessive heat is converted by pressure loss. For example, the hydraulic pipeline blockage or excessive curvature will increase the pressure loss along the way, the valve group action is too frequent, and the energy loss caused by throttling and overflow is too large.
散热源散热能力不足，表现为冷却液质量差，散热能力下降。例如，冷却水为硬水，液压油和油的粘度太大，风扇、水泵、液压泵和散热器因年久失修而冷却能力不足。此外，过高的环境温度和操作错误会导致过多的废热产生。
The heat dissipation capacity of the heat dissipation source is insufficient, which is manifested as poor coolant quality and decreased heat dissipation capacity. For example, the cooling water is hard water, the viscosity of hydraulic oil and oil is too large, and the cooling capacity of fans, pumps, hydraulic pumps and radiators is insufficient due to old disrepair. In addition, excessive ambient temperatures and operating errors can lead to excessive waste heat generation.
另外，济南水稳搅拌站的生产效率决定了整个工程进度的快慢。为保证搅拌的质量和效率，可用挖掘机翻车，平衡原料水分。因为水稳搅拌站黑灰和白灰的含水量是由许多不确定因素决定的，尤其是白灰，消化质量、自身质量、是否筛分等都会影响白灰的使用效率。因此，水稳搅拌站在使用前，要保证白灰适宜的施工含水率，并把握好适宜的开启时间。
In addition, the production efficiency of Ji 'nan water steady mixing station determines the speed of the whole project progress. In order to ensure the quality and efficiency of mixing, the excavator can be used to turn over and balance the moisture of raw materials. Because the water content of black ash and white ash in water stable mixing station is determined by many uncertain factors, especially white ash, digestion quality, own quality, whether screening, etc., will affect the use efficiency of white ash. Therefore, before the use of water stability mixing station, to ensure the appropriate construction moisture content of gray, and grasp the appropriate opening time.
In order to prevent overheating and damage to equipment caused by water stability mixing station, operators need to do regular inspection work and regular maintenance work in daily life. More questions you can come to our website for consultation.
公司地址：济南市商河县贾庄镇民营经济创业园
公司名称:2023澳门正版资料免费 
备案号：