行业资讯
济南路面机械设备降低维修频率要如何做？
来源：/ 日期：2022-04-02
路面机械设备在施工环境下工作非常的频繁，这也表明如果使用时间长了应该会出现各种问题，随着而来的便是维修频率的增加，那么济南路面机械设备降低维修频率要如何做呢？
Road machinery and equipment work very frequently in the construction environment, which also shows that if the use of a long time should appear all kinds of problems, with the increase of maintenance frequency, then ji 'nan road machinery and equipment to reduce the maintenance frequency to do?
在购买到济南路面机械设备之后，操作人员应接受生产厂家的培训和领导，对机器的结构和性能有充分的了解，并获得一定的操作和维修经验后再操作机器。生产厂家提供的产品使用保护说明书是操作人员操作设备的必备资料，操作机器前，应该先阅读使用保护说明书，并按说明书要求进行操作和维护。
After purchasing jinan road machinery and equipment, operators should accept the training and leadership of the manufacturer, have a full understanding of the structure and performance of the machine, and obtain certain operation and maintenance experience before operating the machine. The product protection manual provided by the manufacturer is the necessary information for the operator to operate the equipment. Before operating the machine, the operator should read the protection manual and operate and maintain the equipment according to the requirements of the manual.
注意磨合期的工作量。一般来说，磨合期的工作量不应超过额定工作量的80%。应调配适当的工作量，防止机器长时间连续运转而造成过热现象。注意经常检查各仪表的策动，如有异常应及时停机排除，在未查明原因、故障未排除前终止运行。
Pay attention to the workload during the run-in period. Generally speaking, the workload in the run-in period should not exceed 80% of the rated workload. Appropriate workload should be allocated to prevent overheating caused by continuous operation of the machine for a long time. Pay attention to check the operation of each instrument frequently. If there is any abnormality, stop the machine in time to eliminate it, and terminate the operation before finding out the cause and troubleshooting.
注意经常检查润滑油、液压油、冷却液、制动液、燃油（水）的液位和质量，注意检查整机的密封性能。检查时发现缺油缺水过多，应分析原因。同时，应加强各润滑点的润滑。建议在磨合期内，每班润滑点加润滑脂（特殊要求除外）。
Check the liquid level and quality of lubricating oil, hydraulic oil, coolant, brake fluid and fuel (water) regularly, and check the sealing performance of the whole machine. When the inspection found that lack of oil and water too much, should analyze the cause. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended to add grease to the lubrication point of each shift during the running-in period (except for special requirements).
保持济南路面机械设备清洁，及时调整和紧固松动的零件，防止因松动而磨损或丢失零件。磨合期停止时，应强制维修，并做好检查和调整工作。同时，注意换油。
Keep ji 'nan road machinery and equipment machine clean, timely adjustment and fastening loose parts, to prevent wear or loss of parts due to loosening. When the run-in period stops, maintenance should be compulsory, and inspection and adjustment work should be done. Also, pay attention to oil change.
路面机械设备在磨合期的使用和维护要求可以概括为：加强培训、减轻负荷、注意检查、加强润滑。只要注意并落实机械在磨合期的维护保养，就会减少早期故障的发生，延长使用寿命，提高工作效率，机器会给你带来更多的好处。
The use and maintenance requirements of road machinery and equipment in the run-in period can be summarized as: strengthening training, reducing load, paying attention to inspection and strengthening lubrication. As long as you pay attention to and implement the maintenance of machinery in the run-in period, it will reduce the occurrence of early failures, prolong service life, improve work efficiency, the machine will bring you more benefits.
总归而言便是平常使用设备工作，需要对其进行保养，才能慢慢降低维修频率，毕竟维修次数多了机器的使用寿命会相应的降低。那么更多内容您就来我们网站http:咨询吧。
In general, it is the ordinary use of equipment work, the need to maintain it, in order to slowly reduce the frequency of maintenance, after all, the number of maintenance of the machine will be reduced accordingly. So more content you come to our website consultation.
公司地址：济南市商河县贾庄镇民营经济创业园
公司名称:2023澳门正版资料免费 
备案号：