行业资讯

水稳搅拌站会出现怎样的故障？

来源：/ 日期：2022-03-24

　　水稳搅拌站是一种应用建筑施工场地使用的大型设备，使用时间久了自然而然会出现一些故障，作为操作人员，就要找出是怎样的故障原因，以免后期出现同样的故障。
Water stability mixing station is a kind of large equipment used in construction sites. After a long time of use, some failures will naturally occur. As an operator, it is necessary to find out what the cause of the failure is, so as to avoid the same failure in the later stage.

　　在水稳搅拌站的建设和生产过程中，会出现故障。搅拌主机的无聊现象时有发生。此类故障多为搅拌主机内的搅拌桨搅拌故障，带动搅拌主轴的镗车，直停止转动。
In the construction and production process of water stable mixing plant, there will be failures. The boring phenomenon of stirring engine often occurs. This kind of failure is mostly the stirring paddle in the stirring host stirring failure, driving the boring machine of the stirring spindle, until it stops rotating.

　　出现这种故障的原因可能是：生产过程中，搅拌负荷大，物料箍住搅拌桨。人为失误造成的二次投料问题。称量不准确，搅拌叶片或侧叶片与罐内壁间隙大，造成其他异物进入，堵塞搅拌桨；水稳搅拌站搅拌主机电压过低，降低功率。
The reason for this failure may be: during the production process, the stirring load is large and the material is clamped on the stirring paddle. Secondary feeding problems caused by human error. The weighing is not accurate, and the gap between the mixing blade or side blade and the inner wall of the tank is large, resulting in other foreign bodies entering and blocking the mixing blade; Water stable mixing station mixing host voltage is too low, reduce the power.

　　以上便是问题的讲解内容，当然要避免这类故障的发生就要在日常生活中多对设备进行维护，那么想了解更多内容就来网站咨询吧。

上一条：推不济南摊铺机出租这件事儿呢？

下一条：路面机械设备的保养方法有什么？