公司新闻

摊铺机摊铺面不平整的原因及应对

来源：/ 日期：2022-12-05

摊铺机是一种主要用于高速公路上基层和面层各种材料摊铺作业的施工设备，使用过程中，经常会出现各种大大小小的问题，你知道摊铺机摊铺面不平整的原因及应对吗？下面济南摊铺机出租厂家为您讲解。

The paver is a kind of construction equipment mainly used for paving various materials on the base course and surface course of the expressway. In the process of use, various problems, large and small, often occur. Do you know the reasons and countermeasures for the uneven paving surface of the paver? Next, Jinan Paver Rental Factory will explain to you.

①加热温度（熨平板地板温度120度为宜）；

① Heating temperature (the temperature of screed floor should be 120 ℃);

②熨平板的平整度（底板连接不平整，底板表面不平整）；

② Flatness of screed (uneven connection of base plate and uneven surface of base plate);

③夯锤的速度（夯锤速度过低，出现坑洞；过高，表面起台）；

③ The speed of the rammer (if the rammer speed is too low, holes will appear; if it is too high, the surface will rise);

④行走速度过快，有离析；

④ The walking speed is too fast and there is segregation;

点我：领取工程大礼包。

Click me: Get the project gift package.

⑤螺旋高度不合适，有离析；

⑤ Improper spiral height and segregation;

⑥找平装置安装不正确（装反、超出感应范围等），起波浪；

⑥ The leveling device is installed incorrectly (installed reversely, out of the sensing range, etc.), causing waves;

⑦路基不平整，参照物不准确，摊铺厚度不一致，造成路面发白，碾压时产生推移。料温过低，也会造成摊铺面离析和开裂。

⑦ The subgrade is not smooth, the reference is not accurate, and the paving thickness is inconsistent, which causes the pavement to be white, and the rolling will cause displacement. If the material temperature is too low, it will also cause segregation and cracking of the paving surface.
济南摊铺机出租

应对办法：

Countermeasures:

作业前检查熨平板底板是否平整，底板是否粘连杂物，及时清理和调整；

Before operation, check whether the screed bottom plate is flat and whether there are sundries stuck on the bottom plate, and clean and adjust it in time;

在加热温度达到要求后，再进行摊铺工作；

Paving shall be carried out after the heating temperature reaches the requirements;

在料斗、刮板仓、螺旋处喷洒柴油，防止产生油斑；

Spray diesel oil at hopper, scraper bin and screw to prevent oil stain;

正确设定夯锤与摊铺速度，螺旋的高度以高过摊铺面的两倍高度为宜；

The tamping hammer and paving speed shall be set correctly, and the screw height shall be twice higher than the paving surface;

正确安装找平仪（或平衡梁探头高度与连线的位置）；

Correctly install the leveling instrument (or the position of the balance beam probe height and connecting line);

时刻注意观察参照物是否准确；

Always observe whether the reference object is accurate;

当路基平整度落差过大时，应提前垫料处理。

When the drop of subgrade flatness is too large, padding treatment shall be carried out in advance.

摊铺机摊铺面不平整的原因及应对就讲解到这里了，您对此有什么想法或者问题或者需求，都可以随时来我们网站进行了解！

This is the end of the reason and solution for the uneven pavement of the paver. If you have any ideas, problems or needs, you can come to our website at any time Get to know!

上一条：选沥青混凝土要看性质及制备工艺

下一条：挖掘机的各种操作使用技巧