公司新闻
压路机注意三点能让您使用得心应手
来源：/ 日期：2022-10-24
压路机相比大型压路机来讲，因为体积比较小，所以操作起来十分的便捷，而且大型压路机所拥有的功能，其实它也是具备的，所以凭借着其优势受到了众多朋友们的青睐。为了能够顺利使用压路机，那么还是需要了解清楚压路机的操作事项，这样使用起来才算得心应手。济南压路机租赁厂家为您讲解。
Compared with the large roller, the roller is very convenient to operate because of its small size. In addition, the large roller also has functions, so it is favored by many friends by virtue of its advantages. In order to use the roller smoothly, you still need to know the operation of the roller, so that you can use it easily. Jinan Road Roller Rental Factory will explain to you.
初次使用压路机，由于它的各个零件都是新的，因此摩擦面都还比较的粗糙表面的承压能力也不是很稳定，因此在刚开始使用压路机进行作业的时候，压路机在开机之前要做的就是先检查压路机的制动是否灵敏，制动结果如何，检查零件是否有松动的地方。保障压路机的正常运行，不于施工时出现故障。要注意控制作业的时间和强度，否则一旦出现超负荷作业的情况，很容易使得各个新部件损坏。
When the roller is used for the first time, because all its parts are new, the pressure bearing capacity of the rough surface of the friction surface is not very stable. Therefore, when the roller is just used for operation, what the roller should do before starting up is to check whether the brake of the roller is sensitive, what the brake result is, and whether the parts are loose. The normal operation of the roller shall be ensured to avoid failure during construction. Pay attention to control the time and intensity of the operation, otherwise, in case of overload operation, each new part will be easily damaged.
刚使用的压路机由于都是刚刚装配的，因此各部件之间的润滑都比较欠缺，这对压路机的使用也会造成很大的影响，严重时甚会导致有些零件表面出现擦伤，因此在使用之前要在滚动磨合比较多的地方涂上适量的润滑油。
The newly used roller is just assembled, so the lubrication between the components is relatively insufficient, which will also have a great impact on the use of the roller, and even cause scratches on the surface of some parts in serious cases. Therefore, an appropriate amount of lubricating oil should be applied to the places with more rolling running in before use.
各部件容易出现松动。由于部件都是刚刚装配的之前也没有正常的投入使用过。一旦投入使用过程中受到冲击或者受热等影响，很容易使得压路机原本还比较紧固的部件出现松动的现象。
Parts are easy to loosen. Because the components are just assembled and have not been put into normal use before. Once it is impacted or heated in the process of putting into use, it is easy to make the parts of the roller that are still relatively fastened loose.
操控压路机的驾驶员对机器不够熟悉，由于是新买的机器，驾驶员之前和它也没有打过交道，因此对于它的结构和性能都比较的陌生，因此我们要求驾驶员驾驶压路机之前，先对压路机整个结构做一个观察了解。
The driver who controls the roller is not familiar with the machine. Since it is a newly bought machine and the driver has not dealt with it before, he is unfamiliar with its structure and performance. Therefore, we require the driver to observe and understand the whole structure of the roller before driving it.
The precautions for roller operation are described in four aspects above. It is necessary to learn how to deal with the roller easily to make our construction easier. Don't make a bad impact on the roller because of your wrong operation. For more information on related matters, please come to our website Consult and understand!
公司地址：济南市商河县贾庄镇民营经济创业园
公司名称:2023澳门正版资料免费 
备案号：